单选题An installed manufacturing customer has a mission-critical application that requires a rack mount server that will protect them against downtime in the event memory DIMM failure occurs. They also need load balancing， fault tolerant NICS and redundant p

题目

单选题

An installed manufacturing customer has a mission-critical application that requires a rack mount server that will protect them against downtime in the event memory DIMM failure occurs. They also need load balancing， fault tolerant NICS and redundant power supplies and fans. Which of the following servers meets these requirements.（）

x3200 M3

x3250 M3

x3200 M3 and x3250 M3

x3650 M3

如果没有搜索结果，请直接联系老师获取答案。

更多相关问题

相关问题 1：

单选题A customer uses an IBM xSeries x366 for their network server.They experienced downtime when the NIC failed earlier this year.Their Novell 6.5 server needs to be accessible all the time at the highest speed possible.Slots are available where network adapters can still be added. High availability is the primary requirement， but increased network bandwidth on the server is also required. Which of the following is the most cost-effective solution to satisfy all of the customer’s requirements？（）A Upgrade the network switches to 10Gb speed.B Install a dual port gigabit Ethernet adapter and configure adapter load balancing teaming with the onboard adapters.C Install one extra adapter to team with the internal adapter and configure adapter failover.D Install two additional NICs and configure adapter load balancing teaming with the onboard adapters.

点击查看答案
相关问题 2：

单选题A customer uses an IBM xSeries x366. They experienced downtime when the NIC failed earlier this year. Their Windows 2003 server needs to be accessible all the time， at the highest speed possible. Two adapters are currently installed in the x366. Which of the following is the procedure to obtain the best performance and ensure network functionality in case of NIC failure？（）A Install four NICs and configure load balancing adapter teaming.B Install four NICs and configure adapter failover teaming.C Install seven NICs and configure load balancing adapter teaming.D Install one extra NIC to team with the internal adapter and configure failover teaming.

点击查看答案
相关问题 3：

单选题A customer is considering replacement of twenty older 4U and 6U rack-based servers with one IBM x366 Server running VMWare ESX attached to one DS4300. Which of the following represents a reduction in Total Cost of Ownership （TCO） for the customer？（）A Reduction in operating system software licensing and application costsB Reduction in floor space and hardware cost savingC VMWare is licensed per system so no extra charge for SMP supportD No single point of failure， reducing downtime

点击查看答案
相关问题 4：

单选题An installed manufacturing customer has a mission-critical application that requires a rack mount server that will protect them against downtime in the event memory DIMM failure occurs. They also need load balancing， fault tolerant NICS and redundant power supplies and fans. Which of the following servers meets these requirements.（）A x3200 M3B x3250 M3C x3200 M3 and x3250 M3D x3650 M3

点击查看答案
相关问题 5：

单选题A customer has a mission-critical application with redundant fabrics. The customer plans to replace older EMC Symmetrix 8830 systems with an IBM System Storage DS8700 and an IBM SAN Volume Controller （SVC）. Which statement best describes the way to minimize the impact of data migration on the production environment（）A the production environment does not require an outageB the production environment requires an outage to install the SVCC the production environment requires an outage to install the DS8700D the production environment requires an outage to remove the EMC systems

点击查看答案
相关问题 6：

单选题An application vendor wants to choose a fault tolerant platform for their new application. The application benefits from multiple processors and has been tested on Red Hat Advanced Server 3. To determine the memory requirements for the application， which of the following is the best procedure？（）A The application should be tested and baselines should be measured with simulated user loads.B The application should be tested with the minimum amount of memory then increase the memory in increments until an acceptable response is achieved.C The application should be tested with differing amounts of memory and the fastest response time is reached it should be used as the acceptable configuration.D The application should be tested with the maximum amount of memory then decrease the memory in increments until an acceptable price/performance ratio is reached.

点击查看答案
相关问题 7：

单选题While explaining to a customer the fault tolerant benefits of x445 they ask what happens if they implement memory mirroring and a DIMM fails in the SMP expansion module. Which of the following is the most appropriate response？（）A The DIMM is taken off line， and fault tolerance is available on the other DIMMs only.B The memory bank is taken offline and rebuilt with the online hot spare and then brought back on line.C The memory bank containing the failed DIMM is taken off line， and the system is no longer fault tolerant until replaced.D The DIMM is taken offline， and the online hot spare is initiated and the system remains fault tolerant.

点击查看答案

IBM(000-152)

单选题An installed manufacturing customer has a mission-critical application that requires a rack mount server that will protect them against downtime in the event memory DIMM failure occurs. They also need load balancing， fault tolerant NICS and redundant p

题目

更多相关问题

相关问题 1：

相关问题 2：

相关问题 3：

相关问题 4：

相关问题 5：

相关问题 6：

相关问题 7：

相关内容