单选题How should TCP/IP be configured on the ent0 network adapter?（）A ifconfig en0 192.168.10.1 netmask 255.255.255.0 gateway 192.168.10.254B ifconfig ent0 192.168.10.1 netmask 255.255.255.0 gateway 192.168.10.254C mktcpip test61 -a 192.168.10.1 -i en0 255.2

题目

单选题

How should TCP/IP be configured on the ent0 network adapter?（）

ifconfig en0 192.168.10.1 netmask 255.255.255.0 gateway 192.168.10.254

ifconfig ent0 192.168.10.1 netmask 255.255.255.0 gateway 192.168.10.254

mktcpip test61 -a 192.168.10.1 -i en0 255.255.255.0 192.168.10.254 -smktcpip ? test61 -a 192.168.10.1 -i en0 ? 255.255.255.0 ? 192.168.10.254 -s

mktcpip test61 -a 192.168.10.1 -i ent0 255.255.255.0 192.168.10.254 -smktcpip ? test61 -a 192.168.10.1 -i ent0 ? 255.255.255.0 ? 192.168.10.254 -s

如果没有搜索结果，请直接联系老师获取答案。

更多相关问题

相关问题 1：

单选题Company.com has a cluster with nodes that support "hot swap" adapters. During an upgrade of The network infrastructure，an additional network adapter has been added to the nodes and configured in AIX. What is the next step required to add this adapter to HACMP？（）AStop the node.BStop the cluster.CRun autodiscovery.DConfigure the IP adapter.

点击查看答案
相关问题 2：

单选题You have a Windows Server 2008 R2 Hyper-V server with a single network adapter that is connected to a virtual network. The virtual network is configured as External. Virtual machines （VMs） running on the server are not able to communicate with the host server over the network. You need to ensure that VMs running on the server are able to communicate with the host server over the network. In Virtual Network Manager，what should you do？（）A Select the Internal only connection type.B Select the Private virtual machine network connection type.C Select the Allow management operating system to share this network adapter check box.D Clear the Allow management operating system to share this network adapter check box.

点击查看答案
相关问题 3：

单选题You are a network adminstrator for your company. You install an intranet application on three Windows Server 2003 computers. You configure the servers as a Network Load Balancing cluster. You configure each server with two network adapters. One network adapter provides client computers access to the servers. The second network adapter is for cluster communications. Cluster communications is on a separate network segment. The network team wants to reduce the cluster’s vulnerability to attack. These servers need to be highly available. The network team decides that the Network Load Balancing cluster needs to filter IP ports. The team wants the cluster to allow only the ports that are required for the intranet application. You need to implement filtering so that only the intranet application ports are available on the cluster. You need to achieve this goal by using the minimum amount of administrative effort. What should you do？（）AUse Network Load Balancing Manager to configure port rules. Allow only the intranet application ports on the cluster IP address.BUse TCP/IP filtering on each server. Configure only the intranet application ports on the network adapter that provides client computers access to the servers.CUse TCP/IP filtering on each server. Configure only the intranet application ports on both of the network adapters.DConfigure Routing and Remote Access on each server. Use Routing and Remote Access input filters to allow only the intranet application ports on the network adapter that provides client computers access to the servers.

点击查看答案
相关问题 4：

单选题A pSeries technical specialist is configuring the network adapters for an HACMP cluster. The plan is to use a four-port Ethernet adapter with IPAT via IP aliasing for the two service IP labels. Which of the following would be a critical concern with the proposed configuration？（）A A four-port adapter is not supported.B The four-port adapter is a single point of failure.C There should be a spare port for each service IP label.D The four-port adapter could be a potential performance bottleneck.

点击查看答案
相关问题 5：

单选题You configure a new file server that runs Windows Server 2008. Users access shared files on the file server. Users report that they are unable to access the shared files. The TCP/IP properties for the file server are configured as shown in the following exhibit.（exhibit not there again wtf!） You need to ensure that users are able to access the shared files. How should you configure the TCP/IP properties in the file server？（）A Configure a static IP addressB Configure the default gatewayC Configure the DNS server addressD Add the domain to the DNS suffix on the network interface

点击查看答案
相关问题 6：

单选题Your Company upgrades its network to 100 Mbps. You remove the old network adapter and install a new 10/100 Mbps network adapter into a Windows 2000 Professional computer. You configure the TCP/IP protocol settings to be the same as they were for the previously installed network adapter. When you restart eh computer, however, you cannot access the network. You try to ping your network adapter’s TCP/IP address locally. You receive the following error message. “Request timed out.” Next, you try to ping 127.0.0.1 and receive the same error message. What must you do?（）A Configure a different TCP/IP addressB Enable DHCP in the TCP/IP propertiesC Enable DNS in the TCP/IP propertiesD Configure the network adapter to run at 100 Mbps onlyE Replace the network adapter.

点击查看答案
相关问题 7：

单选题You are the administrator of a Windows 2000 network. You install Windows 2000 Professional on a new computer and configure the TCP/IP settings to have a static IP address. While testing network connectivity from the new computer, you discover an error in the DNS server address that is configured in the TCP/IP settings. You configure the correct DNS server address, which is 10.1.1.5. However, you are still unable to successfully connect to network resources by name. You run the IPconfig/all command. The results indicate that the DNS server address is now configured as 0.0.0.0 You need to ensure that the computer can connect to network resources by name. What should you do?（）A Stop and restart the DNS Client service.B Add 10.1.1.5 to the DNS server list on the TCP/IP Advanced Properties tab.C Add an A （host） record for the computer to the DNS server’s zone file.D Configure your DHCP server to have a DNS server address of 10.1.1.5.

点击查看答案

IBM(000-104)

单选题How should TCP/IP be configured on the ent0 network adapter?（）A ifconfig en0 192.168.10.1 netmask 255.255.255.0 gateway 192.168.10.254B ifconfig ent0 192.168.10.1 netmask 255.255.255.0 gateway 192.168.10.254C mktcpip test61 -a 192.168.10.1 -i en0 255.2

题目

更多相关问题

相关问题 1：

相关问题 2：

相关问题 3：

相关问题 4：

相关问题 5：

相关问题 6：

相关问题 7：

相关内容